Temperature Control (Mp C3004/C3504) - Ricoh MP C3004 Field Service Manual

[G]: Home position
[H]: Shield sensor (to detect HP)
[I]: Reference edge (Reference edge is detected when the main power supply is on, when print is
started, and when print is finished.)

Temperature Control (MP C3004/C3504)

The shield is not equipped and the temperature is managed by the soaking plate and heater control of
end part/center.
Fusing drive
The Pressure roller [B] is driven by the Fusing motor [A].
The Fusing belt [C] is driven by the Pressure roller (drag rotation).
Fusing
1299