Ricoh MP C3004 Field Service Manual page 1047

Hide thumbs Also See for MP C3004:

Table of Contents

Error Name/Error Condition/Major Cause/Solution

Delete all error (Delete data area) : No response from HDD

Delete all error (Delete data area) : Error in Kernel

Delete all error (Delete data area) : No designated partition

Delete all error (Delete data area) : No device file

Delete all error (Delete data area) : Start option error

Delete all error (Delete data area) : No designated sector number

Delete all error (Delete data area) : failure in performing hdderase

Delete all error (Delete data area) : Other fatal errors

Delete all error (Delete data area) : End by cancellation

Delete all error (Delete data area) : library error

Delete all error (Delete data area) : Unavailable

Delete all error (Delete data area) : Erasing not finished

Delete all error (Delete data area) : HDD format failure (Normal)

Delete all error (Delete data area) : HDD format failure (Abnormal)

Delete all error (Delete data area) : Unauthorized library

Delete all error (Delete data area) : other errors

An error occurred while data was being erased on HDD or NVRAM.

• Error detected in HDD data delete program

• Error detected in NVRAM data delete program

• The "Delete All" option was not set

• Turn the main power switch off and back on, and then execute "Erase

All Memory" under UP mode again. (However, if there is a defective

sector or other problem with the hard disk, the error will persist even

after trying the above.)

• If the "Delete All" option is not installed when this error occurs, install

Service Call 816-899

Troubleshooting

Mp c4504 Mp c3504 Mp c5504 Mp c6004