Ricoh MP C3004 Field Service Manual page 805

No. Result
4 HDD error
5 Version information obtain error
6 Update download error
7 Name resolution error
8 Auto update setting disabled
9 Update prohibited time
Update postponed due to machine
10
in use
11 Update cancelled by user
Firmware Update (Auto Remote Firmware Update)
Description
Cannot download or update as the HDD cannot be
used.
Cannot download or update as the version information
cannot be obtained.
Cannot download or update as the update download
failed.
In non @Remote method, this shows that the download
failed because there was no proxy set.
Cannot download or update as the name cannot be
resolved upon downloading the update.
The package has been downloaded but will not run the
update as SP5-886-111 (auto update setting) is
disabled and SP5-886-115 (auto download setting for
SFU) is enabled.
Cannot start to update as the auto update prohibited
time setting (SP5-886-112) is enabled and the time
update initiated was in the range of prohibited time
(SP5-886-113 to 114).
Or the day which update was initiated was a day for
which update was prohibited (SP5-886-120).
Cannot start update due to the following conditions
when update was initiated.
• The machine is in use by a user (the panel was
used within 30 seconds)
• Machine offline for other reasons
• Operation prohibited
• Displaying SP/UP menu
• Firmware update is running with another method
• Configuration change prohibited
• Verifying the operation panel (smart panel)
Update was cancelled because a user selected
"Cancel" in the popup shown before starting the
update.
797