12Gb/s MegaRAID SAS Software User Guide
March 2014
C.9
Enclosure Commands
Table 78 Enclosure Commands
Description
Show enclosure information.
Show enclosure status.
C.10
PHY Commands
Table 79 PHY Commands
Description
Show PHY information.
Set PHY link speed.
Show the PHY error counters.
C.11
Alarm Commands
Table 80 Alarm Commands
Description
Show alarm properties.
Set alarm properties.
15.19
Event Log Properties Commands
MegaCLI Command
MegaCli –EncInfo
-aN|-a0,1,2|-aALL
MegaCli –EncStatus
-aN|-a0,1,2|-aALL
MegaCLI Command
MegaCli –PHYInfo -phyM
-aN|-a0,1,2|-aALL
MegaCLI PhySetLinkSpeed -phyM
-speed -aN|-a0,1,2|-aALL
Megacli PhyErrorCounters -An
MegaCLI Command
MegaCli -AdpGetProp AlarmDsply
-aN|-a0,1,2|-aALL
MegaCli -AdpSetProp AlarmEnbl |
AlarmDsbl | AlarmSilence
-aN|-a0,1,2|-aALL
Appendix C: MegaCLI Commands to StorCLI Command Conversion
storcli /cx/ex show
storcli /cx/ex show all
storcli /cx/ex show status
storcli /cx/px(x|all) show
storcli /cx/px(x|all) show all
storcli /cx/px(x|all) set
linkspeed=0(auto)|1.5|3|6|12
storcli /cx/px(x|all) show
storcli /cx/px(x|all) show all
storcli /cx(x|all) show alarm
storcli /cx(x|all) set
alarm=<on|off|silence>
LSI Corporation
- 396 -
Event Log Properties Commands
StorCLI Command
StorCLI Command
StorCLI Command