Lenovo ThinkServer RD650 User Manual page 393

12Gb/s MegaRAID SAS Software User Guide
March 2014
Description
Secure the virtual drive.
Show specific properties of
virtual drives.
Start virtual drive initialization. MegaCli –LDInit –Start [Fast|Full]
Stop a running virtual drive
initialization.
Show the initialization progress. MegaCli –LDInit –ShowProg
Start a consistency check on an
uninitialized virtual drive.
Start, stop, suspend, resume,
and show the progress of a
consistency check operation.
Enable/disable automatic
background initialization.
Show, stop, pause, resume, and
show the progress of the
background initialization.
Start and show progress for a
migrate operation.
Delete preserved cache.
Assign the CacheCade virtual
drive.
MegaCLI Command
MegaCLI --LDMakeSecure
-Lx|-L0,1,2,...|-Lall –An
MegaCli –LDGetProp -Cache |
-Access | -Name | -DskCache
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli –LDInit -Abort
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli –LDCC –Start
–Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli -LDCC -Start|-Abort|
-Suspend|-Resume|-ShowProg|
-ProgDsply -Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-aALL
MegaCLI -LDBI -Enbl|-Dsbl|
-getSetting|-Abort|-Suspend|
-Resume|-ShowProg|-ProgDsply
-Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-Aall
MegaCli –LDRecon {–Start –Rx [Add
| Rmv PhysDrv[E0:S0,E1:S1,...] ] }
| –ShowProg|-ProgDsply –Lx –aN
MegaCLI -DiscardPreservedCache
-Lx|-L0,1,2|-Lall -force
-aN|-a0,1,2|-aALL
MegaCLI -Cachecade -assign|-remove
-Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-aALL
Appendix C: MegaCLI Commands to StorCLI Command Conversion
storcli /cx/vx set security=on
storcli /cx/vx show
storcli /cx/v(x|all) start init[Full]
storcli /cx/v(x|all) stop init
storcli /cx/v(x|all) show init
storcli /cx/v(x|all) start cc[Force]
storcli /cx/v(x|all) start cc
storcli /cx/v(x|all) stop cc
storcli /cx/v(x|all) pause cc
storcli /cx/v(x|all) resume cc
storcli /cx/v(x|all) show cc
storcli /cx/v(x|all) set autobgi=On|Off
storcli /cx/v(x|all) show autobgi
storcli /cx/v(x|all) stop bgi
storcli /cx/v(x|all) pause bgi
storcli /cx/v(x|all) resume bgi
storcli /cx/v(x|all) show bgi
storcli /cx/vx start migrate type=raidx
[option=add|remove
drives=[e:]s|[e:]s-x|[e:]s-x,y] [Force]
storcli /cx/v(x|all) show migrate
storcli /cx/v(x|all) delete
preservedcache[force]
storcli /cx/vx|all set ssdCaching=on|off
LSI Corporation
- 393 -
Battery Commands
StorCLI Command