Executing A Cim Plug-In On Red Hat Enterprise Linux 5; Megaraid Storage Manager Software Customization - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
If the .so files are not present in the /usr/lib directory, create a link with the existing version of the library. For
example, if libcrypto.so.6 is present and libcrypto.so is not, create the link as follows:
ln -s libcrypto.so.6 libcrypto.so.4
On a 64-bit operating system, the system libraries are present in the /usr/lib64 directory by default. However, for
supporting CIM Plug-in, make sure that the libraries are also present in /usr/lib by installing the appropriate RPMs.
7.3.10.2

Executing a CIM Plug-in on Red Hat Enterprise Linux 5

To execute a Common Information Model (CIM) plug-in on Red Hat Enterprise Linux 5, you must create the following
symbolic links:
1. cd /usr/lib on RHEL 5
2. Search for libcrypto, libssl, and libsysfs libraries as follows:
ls -lrt libcrypto*, ls -lrt libssl*, ls -lrt libsysfs*
3. If the files libcrypto.so.4, libssl.so.4, and libsysfs.so.1 are missing, manually create sym links as
follows:
ln -s libcrypto.so libcrypto.so.4 
ln -s libssl.so libssl.so.4 
ln -s libsysfs.so libsysfs.so.1
For more information about CIM, see
If the .sofiles are not present in the /usr/lib directory, create a link with the existing version of the library. For
example, if libcrypto.so.6 is present and libcrypto.so is not, create the link as follows:
ln -s libcrypto.so.6 libcrypto.so.4
On a 64-bit operating system, the system libraries are present in the /usr/lib64 directory by default. However, for
supporting CIM Plug-in, make sure that the libraries are also present in /usr/lib by installing the appropriate RPMs.
7.3.11

MegaRAID Storage Manager Software Customization

You can customize your Logo and Splash window by editing the msm.properties file present in the
<installation-directory\MegaRAID Storage Manager> folder.
The msm.properties file has no values for the following keys:
CHANNELLOGO=

CHANNELSPLASHSCREEN=

No default values are assigned for these keys; therefore, the MegaRAID Storage Manager uses the default LSI Logo and
splash screen.
To customize the Logo and splash screen, enter the Logo and Splash screen file name against these entries.
To enter the file names follow these steps:
1. Open the msm.properties file in the <installation-directory\MegaRAID Storage Manager>
folder.
2. Enter the value for the logo file against the key CHANNELLOGO.
3. Enter the value for the splash screen file against the key CHANNELSPLASHSCREEN.
4. Save the file.
5. Place these two images in the <installation-directory\MegaRAID Storage Manager> folder.
6. Start the application.
Following are some of important points that you need to keep in mind:
MegaRAID Storage Manager Support on the VMware ESXi Operating
LSI Corporation
- 214 -
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing MegaRAID Storage Manager
System.