Lenovo ThinkServer RD650 User Manual page 230

***MainBookTitle***
***ReleaseDate***
Figure 120 Configure Host
Select any one of the following options from Display preferences.
Display only the local server – Discovers only the local MegaRAID Storage Manager server.
—
Display the systems from the following favorite list – Allows you to enter IP addresses of the MegaRAID
—
Storage Manager servers and discovers only those servers. You can enter an IP address in the Enter IP
Address field and click Add. The server corresponding to the IP address appears in the Favorite list.
Display all the systems in the Network of the local server – Discovers all the MegaRAID Storage Manager
—
servers available in the network.
Display all the ESXi-CIMOM servers in the network of local server - Discovers the local MegaRAID Storage
—
Manager server and all the available ESXi servers in the network.
2. Click Save Settings. A confirmation dialog appears asking you to confirm your settings.
3. Click OK in the confirmation dialog to start the discovery process.
After the discovery process is completed, the servers appear in the Select Server dialog.
NOTE On some Windows machines, the discovery of VMware ESXi servers fail
as a result of a bug in the third-party application that is used for
discovery. This is caused by one of the Windows servers in the network
that contains a service called IBM SLP SA, which gets installed along
with the IBM Director. If we stop this service on all the Windows servers
in the network, the MegaRAID Storage Manager can discover all the
ESXi servers.
***Confidentiality***
- 230 -
Chapter 8: MegaRAID Storage Manager Window and Menus
Discovery and Login