Lenovo ThinkServer RD650 User Manual page 233
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
***MainBookTitle***
***ReleaseDate***
Figure 122 LDAP Login
Follow these steps to enter the LDAP login details:
1.
Enter the IP address of the LDAP server in the LDAP Server IP Address field
2.
Enter the LDAP server's user name and password in the User Name and Password fields, respectively. An
example of a user name can be username@testldap.com.
3.
Enter the name of the Domain Controller in the Distinguished Name field. As an example, the Domain Controller
name can be dc= TESTLDAP, dc=com.
4.
Perform one of these actions:
If you want to use the default port number, select the Use Default Port check box. The default port number,
—
389, appears in the Port field.
If you do not want to use the default port number, uncheck the Use Default Port check box, and enter a port
—
number in the Port field.
5.
Select the Remember my Login Details check box if you want to save all the values entered in this dialog in the
LDAP Settings tab in the Configure Host dialog.
6.
Click Login to log in to the LDAP server.
NOTE
The LDAP Server IP Address, User Name, Password, and
Distinguished Name fields are already populated if their
corresponding values have been stored in the LDAP Settings tab in the
Configure Host dialog.
***Confidentiality***
- 233 -
Chapter 8: MegaRAID Storage Manager Window and Menus
LDAP Support
Advertisement
Table of Contents
