Starting A Learn Cycle Manually; Monitoring Rebuilds And Other Processes - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
10.21.2

Starting a Learn Cycle Manually

To start the learn cycle properties manually, perform the following steps:
1. Click the Physical tab to open the Physical view.
2. Select the BBU icon in the left panel.
3. Perform one of these actions:
Select Go To > BBU > Start Manual Learn Cycle.
—
Right-click the BBU icon, and select Start Manual Learn Cycle from the pop-up menu.
—
10.22

Monitoring Rebuilds and Other Processes

The MegaRAID Storage Manager software lets you monitor the progress of rebuilds and other lengthy processes in
the Group Show Progress window.
To monitor the progress of these operations, open the show progress window by selecting Manage > Show Progress
on the menu bar.
The Group Show Progress dialog appears.
Figure 195 Group Show Progress Window
The Group Show Progress window displays a percent-complete indicator for drive rebuilds. Rebuilds might take a
long time to complete. An up-arrow appears above the drive icon while it is being rebuilt.
Operations on virtual drives appear in the left panel of the window, and operations on drives appear in the right
panel. The type of operations that appear in this window are as follows:
Initialization of a virtual drive

LSI Corporation
- 311 -
Chapter 10: Monitoring Controllers and Their Attached Devices
Monitoring Rebuilds and Other Processes