Managing Power Save Settings For The Drive Group - Lenovo ThinkServer RD650 User Manual
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 57 Manage Power Save – Advanced
2.
Perform one of these two actions:
Specify a start and end time, for the drives to be in active state, in the Start Time and End Time fields,
—
respectively.
Select the Do not Schedule Drive Active Time check box to disable the Start Time and End Time fields.
—
3.
Press OK.
4.13.10
Managing Power Save Settings for the Drive Group
You can change the power save settings for a selected drive group.
Perform the following steps to change the power save settings for a drive group:
1.
Navigate to a drive group in the VD Mgmt screen, and press the F2 key.
2.
Navigate to Manage Power Save Settings and press Enter.
The Manage Power Save Settings dialog appears.
Figure 58 Manage Power Save Settings – Drive Group
3.
Select a power save mode from the Select power save mode drop-down list.
A description of the selected mode appears in the dialog.
4.
Press OK.
LSI Corporation
- 86 -
Chapter 4: Ctrl-R Utility
Viewing and Changing Device Properties
Advertisement
Table of Contents
