Lenovo ThinkServer RD650 User Manual page 402
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
Number
0x48
0x49
0x4a
0x4b
0x4c
0x4d
0x4e
0x4f
0x50
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5a
0x5b
0x5c
0xFF
0x5d
0x5e
0x5f
0x60
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6a
0x6b
0x6c
0x6d
Event Text
Lock key is not valid, cannot authenticate
Lock key from escrow cannot be used
Lock key backup (pass-phrase) is required
Secure LD exist
LD secure operation is not allowed
Reprovisioning is not allowed
Drive security type (FDE or non-FDE) is not appropriate for requested operation
LD encryption type is not supported
Cannot mix FDE and non-FDE drives in same array
Cannot mix secure and unsecured LD in same array
Secret key not allowed
Physical device errors were detected
Controller has LD cache pinned
Requested operation is already in progress
Another power state set operation is in progress
Power state of device is not correct
No PD is available for patrol read
Controller reset is required
No EKM boot agent detected
No space on the snapshot repository VD
For consistency SET PiTs, some PiT creations might fail and some succeed
Invalid status - used for polling command completion
Secondary iButton cannot be used and is incompatible with controller
PFK doesn't match or cannot be applied to the controller
Maximum allowed unconfigured (configurable) PDs exist
IO metrics are not being collected
AEC capture needs to be stopped before proceeding
Unsupported level of protection information
PDs in LD have incompatible EEDP types
Request cannot be completed because protection information is not enabled
PDs in LD have different block sizes
LD Cached data is present on a (this) SSCD
Config sequence number mismatch
Flash image is not supported
Controller cannot be online-reset
Controller booted to safe mode, command is not supported in this mode
SSC memory is unavailable to complete the operation
Peer node is incompatible
Dedicated hot spare assignment is limited to array(s) with same LDs.
LSI Corporation
- 402 -
Appendix E: CLI Error Messages
Advertisement
Table of Contents
