Controller Security Commands - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
Table 41 Set Advanced Software Options Input Options
Option
key
deactivatetria
lkey
rehostcomplete —
transfertovault
Input example:
storcli /c0 set Aso key=LSI0000
storcli /cx show safeid
This command shows the Safe ID of the specified controller.
Input example:
storcli /c0 show safeid
6.6.2.5

Controller Security Commands

The Storage Command Line Tool supports the following controller security commands:
storcli /cx compare securitykey=ssssss
storcli /cx delete securitykey
storcli /cx set securitykey keyid=kkkk
storcli /cx set securitykey=sssss [passphrase=sssss][keyid=sssss]
storcli /cx set securitykey=sssss
[keyid=sssss]
The detailed description for each command follows.
storcli /cx show securitykey keyid
This command shows the security key on the controller.
Input example:
storcli /c0 show securityKey keyid
storcli /cx compare securitykey=ssssss
This command compares and verifies the security key of the controller.
storcli /cx delete securitykey
This command deletes the security key of the controller.
Input example:
storcli /c0 delete securitykey
storcli /cx set securitykey keyId=kkkk
This command sets the key ID for the controller. The key ID is unique for every controller.
storcli /cx set securitykey=sssss [passphrase=sssss][keyid=sssss]
This command sets the security key for the controller. You can use the following options with the set security
key command.
Value Range
40 alpha numeric characters. Key to activate ASO on the controller.
—
—
NOTE After they are activated, ASOs cannot be removed from the controller.
Deactivates the trial key applied on the specified controller.
Enables rehosting on the specified controller.
Transfers the ASO key to the vault and disables the ASO.
oldsecuritykey=ssss [passphrase=sssss]
LSI Corporation
- 169 -
Working with the Storage Command Line Tool
Description
Chapter 6: StorCLI