Lenovo ThinkServer RD650 User Manual page 379

12Gb/s MegaRAID SAS Software User Guide
March 2014
Table 63 Virtual Drive Commands
Description
Create a RAID volume of the specified
RAID type.
Delete virtual drives.
Show drive group information.
Scan and show available foreign
configurations, provide a preview of
the imported foreign configuration,
show or import foreign
configuration.
Show VD information, including
name, RAID level, RAID level qualifier,
size in MBs, state, strip size, number
of drives, span depth, cache policy,
access policy, and any ongoing
activity progress, which includes
initialization, background
initialization, consistency check, and
reconstruction.
3Ware CLI Command
/cx add vd type=<RaidType>
disk=<p:p|p-p|p:p-p>>> (where p=port or
drive number)
[strip=<size>] [nocache|nowrcache]
[nordcache|rdcachebasic]
[name=string (9000 series)]
[ignoreECC]
[autoverify|noautoverify]
v0=n|vol=a:b:c:d] (n, a, b, c, d=size of
volume in GB)
[noqpolicy]
[storsave=<protect|balance|perform>
]
[noscan]
[rapidrecovery=<all|rebuild|disable
>]
[group=<3|4|5|6|7|8|9|10|11|12|13|1
4|15|16>]
RaidType={raid0, raid1, raid5,
raid10, raid50, single, spare,
raid6}
/cx/ux del [quiet]
NOTE You can delete a single unit using this
command.
/cx/ux show [all]
NOTE Information of each unit is shown individually.
/cx rescan
/cx/ux show [all]
LSI Corporation
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
/cx add vd
type=raid[0|1|5|6|10|50|60]
[[size=<vd1_size>,<vd2_size>,..|
*all][name=<vdname1>,..]
drives=e:s|e:s-x|e:s-x,y|e:s-x,y,z
[pdperarray=x|*auto] [sed]
[pdcache=on|off|*default ]
[pi][dimmerswitch|
ds=default|automatic(auto)|
*none|maximum(max)
|maximumwithoutcaching(maxnocache)]
[wt|*wb|awb] [nora|*ra]
[*direct|cached]
[strip=<8|16|32|64|128|256|512|
1024] [aftervd=x]
[
spares=[e:]s|[e:]s-x|[e:]s-x,y|[e:]
s-x,y,z> ] [force]
/cx/vx [all] delete [force]
[cachecade]
NOTE You can delete one virtual disk, multiple
virtual disks, or all the selected virtual disks on
selected adapters using this command.
/cx/dall show [cachecade]
cx/fall [all] show [preview]
[ securityKey=sssssssssss ]
cx/fall [all] import
[ securityKey=sssssssssss ]
/cx/vx show all
- 379 -
Virtual Drive Commands
StorCLI Command