12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 181 Configure Alerts
You can select the Alert Settings tab to perform the following actions:
Edit the alert delivery method for different severity levels.
Change the method of delivery for each individual event.
Change the severity level of each individual event.
Save an .xml backup file of the entire alert configuration.
Load all the values from a previously saved backup into the dialog to edit or save these values as the current alert
notification configuration.
You can select the Mail Server tab to perform the following actions:
Enter or edit the sender email address.
Enter the SMTP server name or the IP address.
Enter the SMTP server authentication related information (user name and password).
Save an .xml backup file of the entire alert configuration.
NOTE
When you load a saved backup file, all unsaved changes made in the
current session will be lost.
NOTE
These fields are optional and are filled only when the SMTP server
requires authentication.
LSI Corporation
- 294 -
Chapter 10: Monitoring Controllers and Their Attached Devices
Configuring Alert Notifications