Lenovo ThinkServer RD650 User Manual page 260

***MainBookTitle***
***ReleaseDate***
can perform a check consistency, initialize multiple virtual groups, and show the progress of group operations on
virtual drives.
Go To Menu
The Go To menu is available when you select a controller, drive group, physical drive, virtual drive, or battery backup
unit in the main menu screen. The menu options vary depending on the type of device selected in the left panel of the
MegaRAID Storage Manager main menu. The options also vary depending on the current state of the selected device.
For example, if you select an offline drive, the Make Drive Online option appears in the Physical Drive menu.
Configuration options are also available. This is where you access the Configuration Wizard that you use to configure
drive groups and virtual drives To access the Wizard, select the controller in the left panel, and then select Go To >
Controller > Create Virtual Drive.
Log Menu
The Log menu includes options for saving and clearing the message log. For more information about the Log menu,
see Events and
Tools Menu
On the Tools menu, you can select Tools > Configure Alerts to access the Configure Alerts dialog, where you can set
the alert delivery rules, event severity levels, exceptions, and e-mail settings. For more information, see
Alert Notifications.
Help Menu
On the Help menu, you can select Help > Contents to view the MegaRAID Storage Manager online help file. You can
select Help > About MegaRAID Storage Manager to view version information for the MegaRAID Storage Manager
software.
Messages.
NOTE When you use the MegaRAID Storage Manager online help, you might
see a warning message that Internet Explorer has restricted the file
from showing active content. If this warning appears, click on the
active content warning bar, and enable the active content.
NOTE If you are using the Linux operating system, you must install Firefox®
browser or Mozilla® browser for the MegaRAID Storage Manager
online help to display.
NOTE When connected to the VMware server, only the IP address and the
host name information appear. The other information, such as the
operating system name, version, and architecture do not appear.
GUI Elements in the MegaRAID Storage Manager Window and Menus
***Confidentiality***
- 260 -
Chapter 8: MegaRAID Storage Manager Window and Menus
Configuring