Lenovo ThinkServer RD650 User Manual page 166

12Gb/s MegaRAID SAS Software User Guide
March 2014
storcli /cx resume patrolread
storcli /cx set patrolread ={{on mode=<auto|manual>}|{off}}
storcli /cx set patrolread [starttime=<yyyy/mm/dd hh>] [maxconcurrentpd=<value>]
[includessds=<on|off>] [uncfgareas=<on|off>]
storcli /cx set patrolread
storcli /cx show patrolread
storcli /cx start patrolread
storcli /cx stop patrolread
storcli /cx pause patrolread
The detailed description for each command follows.
storcli /cx resume patrolread
This command resumes a suspended patrol read operation.
Input example:
storcli /c0 resume patrolread
storcli /cx set patrolread {=on mode=<auto|manual>}|{off}
This command turns the patrol read scheduling on and sets the mode of the patrol read to automatic or manual.
Input example:
storcli /c0 set patrolread=on mode=manual
storcli /cx set patrolread [starttime=<yyyy/mm/dd hh>] [maxconcurrentpd=<value>] [includessds=<on|off>]
[uncfgareas=on|off]
This command schedules a patrol read operation. You can use the following options for patrol read command
Table 39 Set Patrolread Input Options
Option
starttime
maxconcurrentpd Valid number of physical drives present
includessds
uncfgareas
Input example:
storcli /c0 set patrolread=on starttime=2012/02/21 00
storcli /cx set patrolread [delay=<value>]
This command delays the scheduled patrol read in hours.
Input example:
storcli /c0 set patrolread delay=30
NOTE A patrol read operation is scheduled for all the physical drives of the
controller.
Value Range
A valid date and hour in 24 hours format
—
—
NOTE Controller time is taken as a reference for scheduling a patrol read
operation.
delay=<value>
Sets the start time in yyyy/mm/dd hh format.
Sets the number of physical drives that can be patrol read at a
single time.
Include SSDs in the patrol read.
Include the areas not configured in the patrol read.
LSI Corporation
- 166 -
Chapter 6: StorCLI
Working with the Storage Command Line Tool
Description