12Gb/s MegaRAID SAS Software User Guide
March 2014
9.1.5
Creating a Virtual Drive Using Advanced Configuration
The advanced configuration procedure provides an easy way to create a new storage configuration. Advanced
configuration gives you greater flexibility than simple configuration because you can select the drives and the virtual
drive parameters when you create a virtual drive. In addition, you can use the advanced configuration procedure to
create spanned drive groups.
Follow these steps to create a new storage configuration in the advanced configuration mode. This example shows
the configuration of a spanned drive group.
1.
Perform either of the following steps to bring up the Configuration wizard:
Right-click the controller node in the device tree in the left frame of the MegaRAID Storage Manager
—
window, and select Create Virtual Drive.
Select the controller node, and select Go To > Controller > Create Virtual Drive in the menu bar.
—
The dialog for the choosing the configuration mode (simple or advanced) appears, as shown in the following
figure.
Figure 157 Create Virtual Drive - Choose mode Dialog
2.
Select the Advanced radio button, and click Next.
The Create Drive Group Settings window appears, as shown in the following figure.
LSI Corporation
- 266 -
Chapter 9: Configuration
Creating a New Configuration