Linux Error Messages; Kernel Upgrade; Uninstalling Megaraid Storage Manager Software On Rhel Or Sles/Suse Linux; Executing A Cim Plug-In On Red Hat Enterprise Linux 5 - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
7.3.8

Linux Error Messages

The following messages can appear while you are installing the MegaRAID Storage Manager software on a Linux
operating system:
 More than one copy of MegaRAID Storage Manager software has been installed.
This message indicates that the user has installed more than one copy of the MegaRAID Storage Manager
software. (This step can be done by using the rpm-force command to install the rpm file directly, which is not
recommended, instead of using the install.sh file.) In such cases, the user must uninstall all of the rpm files
manually before installing the MegaRAID Storage Manager software with the procedure listed previously.
 The version is already installed.
This message indicates that the version of the MegaRAID Storage Manager software you are trying to install is
already installed on the system.
 The installed version is newer.
This message indicates that a version of the MegaRAID Storage Manager software is already installed on the
system, and it is a newer version than the version you are trying to install.
 Exiting installation.
This is the message that appears when the installation is complete.
 RPM installation failed.
This message indicates that the installation failed for some reason. Additional message text explains the cause of
the failure.
7.3.9

Kernel Upgrade

If you want to upgrade the kernel in the Linux operating system, you must restart the MegaRAID Storage Manager
Framework and Services in the same order by entering the following command.
/etc/init.d/vivaldiframeworkd restart
7.3.10

Uninstalling MegaRAID Storage Manager Software on RHEL or SLES/SUSE Linux

To uninstall the MegaRAID Storage Manager software on a system running Linux, follow these steps:
1. Go to/usr/local/MegaRAID Storage Manager.
2. Run ./uninstaller.sh.
This procedure uninstalls the MegaRAID Storage Manager software.
7.3.10.1

Executing a CIM Plug-in on Red Hat Enterprise Linux 5

To execute a Common Information Model (CIM) plug-in on RHEL 5 and SLES operating systems, you must create the
following symbolic links:
1.
cd /usr/lib64
2. Search for libcrypto and libssl libraries as follows:
ls -lrt libcrypto*, ls -lrt libssl*
3. If the files libcrypto.so.4 and libssl.so.4 are missing, manually create sym links as follows:
ln -s libcrypto.so libcrypto.so.4 
ln -s libssl.so libssl.so.4
For more information about CIM, see MegaRAID Storage Manager Support on the VMware ESXi Operating
LSI Corporation
- 213 -
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing MegaRAID Storage Manager
System.