Changing Alert Delivery Methods For Individual Events - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
10.4

Changing Alert Delivery Methods for Individual Events

You can change the alert delivery options for an event without changing the severity level.
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events.
The Change Individual Events dialog appears, as shown in the following figure. The dialog shows the events by
their ID number, description, and the severity level.
Figure 183 Change Individual Events
3. Click an event in the list to select it.
The current alert delivery methods appear for the selected event in the Alert Delivery Methods frame.
4. Select the desired alert delivery methods for the event.
5. Click OK to return to the Configure Alerts window.
6. You may click Cancel to discard your current changes and to go back to the Configure Alerts window.
7. In the Configure Alerts window, click OK.
NOTE You can click Restore Defaults to revert back to the default alert
delivery method and the default severity level of an individual event.
LSI Corporation
- 296 -
Chapter 10: Monitoring Controllers and Their Attached Devices
Changing Alert Delivery Methods for Individual Events