Lenovo ThinkServer RD650 User Manual page 202

12Gb/s MegaRAID SAS Software User Guide
March 2014
PC-compatible computer with an IA-32 (32-bit) Intel Architecture processor or an EM64T (64-bit) processor; also

compatible with SPARC V9 architecture-based systems
Minimum 256 MB of system memory (512 MB recommended)

A hard drive with at least 400 MB available free space; Solaris™ 10 X86 and Solaris™ 10 SPARC, Solaris™ 11 X86 and

Solaris™ 11 SPARC requires a minimum of 640 MB.
The supported operating systems for the MegaRAID Storage Manager software are as follows:
Microsoft® Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows Server 2008 R2, Microsoft

Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows 8, Microsoft Windows 8.1, and
Microsoft Windows 2012.
Oracle Enterprise Linux 5 U6 and U7, Oracle Enterprise Linux 6 and U1, Oracle Enterprise Linux 5.10 and 6.5.

Red Hat Linux 3.0, 4.0, 5.0, 5.8, 5.9, 5.10, 6.0, and 6.5,. The MegaRAID Storage Manager software supports 64-bit

environment from RHEL 6 onwards.
Solaris 10 x86, Solaris SPARC, Solaris 11 x86, Solaris 11 SPARC, Solaris 11 Update 1 x86, and Solaris 11 Update 1

SPARC,
SUSE Linux/SLES 9, 10, 11, 11 SP2, and 11 SP3 with the latest updates and service packs

VMware ESX 4.0 and 4.1

VMware ESXi 4.0, 4.1, 5.0, 5.0 Update 2, 5.1, 5.1 Update 1, and 5.5

Citrix XenServer 6.0

Refer to your server documentation and to the operating system documentation for more information on hardware
and operating system requirements.
You can use the MegaRAID Storage Manager software to remotely monitor the systems running the VMware ESXi (3.5
and above) operating system.
NOTE Support of the SNMP Agent is deprecated during the default
installation of the MegaRAID Storage Manager software on Microsoft
Windows 8.1, Microsoft Windows 2012, and later versions. However, in
a custom installation, if you select SNMP as one of the utilities, the
SNMP Agent gets installed.
NOTE The MegaRAID Storage Manager software is supported in the Network
Address Translation (NAT) environment also. If the server is installed in
a remote machine and you want to connect to that server over a NAT
environment, through a remote client, you can connect to the remote
server by providing the NAT IP address.
NOTE The MegaRAID Storage Manager software uses the local IP address in
the same subnet as the SMTP server to deliver email notifications to
the SMTP server.
NOTE Storelib libraries need the capability to be installed with more than
one version. All the storelib libraries have been moved to a private
location. Please do a clean un-installation and only then install the
MegaRAID Software Manager to avoid any conflicts.
LSI Corporation
- 202 -
Chapter 7: MegaRAID Storage Manager Overview and Installation
Hardware and Software Requirements