Running The Cim Sas Storage Provider On Pegasus; Installing A Cim Sas Storage Provider On Windows - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
To uninstall a CIM SAS Storage Provider on a Linux system, remove LSI CIM SAS Provider by entering the

command:
rpm –ivh LsiSASProvider-<version>.<arch>.rpm
This removes all of the necessary files, uninstalls the MOF, and unregisters the libraries. The SAS Provider is no
longer on the system.
7.5.2

Running the CIM SAS Storage Provider on Pegasus

To run the CIM SAS Storage Provider on Pegasus version 2.5.x, perform the following steps:
1. After you install the LSI SAS Pegasus provider, verify that the libLsiSASProvider.so file and the
libLsiSASProvider.so.1 file are in/usr/lib/Pegasus/providers directory.
If these files are not present, copy the libLsiSASProvider.so.1 file from
/opt/tog-pegasus/providers/lib to /usr/lib/Pegasus/providers, and create a symbolic link
libLsiSASProvider.so to /usr/lib/Pegasus/providers/libLsiSASProvider.so.1 at
/usr/bin/Pegasus/providers.
2. Restart the Pegasus CIM Server and LSIServer by performing the following steps:
To start the tog-pegasus server, run the following command:
—
To start LSISAS Sever, run the following command:
—
7.5.3

Installing a CIM SAS Storage Provider on Windows

The following procedure describes how to install and uninstall the LSI CIM SAS Storage Provider on a system running
on a Windows operating system.
Perform the following steps to install a CIM SAS Storage Provider on a Windows system:
1. Go to DISK1.
2. Run setup.exe.
The installer installs all of the necessary files and the MOF, and registers the COM DLL. The CIM SAS Provider is
now ready to use.
Perform the following steps to uninstall a CIM SAS Storage Provider on a Windows operating system.
1. Select Control Panel > Add/Remove Program.
2. Remove the LSI WMI SAS Provider Package.
This step removes all of the necessary files, uninstalls the MOF, and unregisters the COM dll. The SAS Provider is no
longer on the system.
NOTE After you install LSI CIM SAS Provider, the MOF file
LSI_SASRaid.mof is available under the
/etc/lsi_cimprov/sas/pegasus/common directory.
NOTE Tog-pegasus binaries, such as cimmof, cimprovider, and wbemexec,
should be in the PATH variable of /etc/profile, and hence, are
defined in all environments of the system.
# /etc/init.d/tog-pegasus restart
# /etc/init.d/LsiSASd restart
LSI Corporation
- 219 -
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing and Configuring a CIM Provider