Stopping The Pop-Up Notification Process; Windows Operating System; Linux, Solaris X86, And Solaris Sparc Operating Systems; Restarting The Pop-Up Notification Process - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
File names for both entries should not have any spaces. For example, the valid file name would be:

logo_test_1.png, LogoTest1.png, or TEST_SPLASH_FILE.jpg.
The logo image dimensions should not exceed 160 pixels x 85 pixels (width x height).

The splash screen image dimensions should not exceed 390 pixels x 260 pixels (width x height).

After making the changes mentioned previously, when you log into the MegaRAID Storage Managers software, you
will be able to view the changes with the new splash screen and logo in the MegaRAID Storage Manager software.
7.3.12

Stopping the Pop-Up Notification Process

The pop-up notification is started automatically when you login to the operating system. To stop the pop-up
notification, you need to follow certain steps based on your operating system.
7.3.12.1

Windows Operating System

To stop the pop-up notification process on the Windows operating system, follow these steps:
1. Go to the command prompt.
2. Go to the <MSM_INSTALLATION_FOLDER>\MegaPopup folder.
3. Run the command, popup -stop.
After running the preceding command, the pop-up process stops.
7.3.12.2

Linux, Solaris x86, and Solaris SPARC Operating Systems

To stop the pop-up notification process on Linux, Solaris x86, or Solaris SPARC operating systems, follow these steps:
1. Go to the command prompt.
2. Go to the <MSM_INSTALLATION_FOLDER>\MegaPopup folder.
3. Run the script, shutdownpopup -sh in the console.
After running the preceding command, the pop-up process stops.
7.3.13

Restarting the Pop-Up Notification Process

When you restart the MegaRAID Storage Manager Framework Service in Windows, Linux, Solaris X86, or Solaris SPARC
operating systems, and if you want to see the pop-up notifications, you need to start the popup process.
For the Windows operating system, you must first stop the pop-up process (see

then restart the same. After stopping the pop-up process, run the Popup.exe command in the same console.
The pop-up process is started again
For the Linux operating system, you must first stop the pop-up process (see

Operating
from the same console. The pop-up process is started again.
For the Solaris x86 or Solaris SPARC operating system, you must first stop the pop-up process (see

x86, and Solaris SPARC Operating
./popup command from the same console. The pop-up process is started again.
7.4

Installing and Supporting MegaRAID Storage Manager Software on VMware

This section documents the installation of the MegaRAID Storage Manager software on VMware ESX (also known as
Classic) and on the VMware ESXi operating system.
Systems) and then restart the same. After stopping the pop-up process, run the ./popup&command
Systems) and then restart the same. After stopping the pop-up process, run the
Installing and Supporting MegaRAID Storage Manager Software on VMware
LSI Corporation
- 215 -
Chapter 7: MegaRAID Storage Manager Overview and Installation
Windows Operating
Linux, Solaris x86, and Solaris SPARC
System) and
Linux, Solaris