Lenovo ThinkServer RD650 User Manual page 392

12Gb/s MegaRAID SAS Software User Guide
March 2014
C.6 Security Commands
Table 75 Security Commands
Description
Set the key ID for the controller.
Change the security key for the
controller.
Compare and verify the security
key for the controller.
Delete the security key.
Set the security key for the
controller.
C.7 Virtual Drive Commands
Table 76 Virtual Drive Commands
Description
Show the virtual drive
information.
Set virtual drive properties.
Set power-saving (dimmer
switch) properties.
Show virtual drive expansion
information.
Expand the virtual drive within
the existing array; also use if
you replace the drives with
larger drives, beyond the size of
the existing array.
MegaCLI Command
MegaCli -CreateSecurityKey
-SecurityKey sssssssssss |
[-Passphrase sssssssssss]
|[-KeyID kkkkkkkkkkk] -aN
MegaCli -ChangeSecurityKey
-OldSecurityKey sssssssssss | -Secur
ityKey sssssssssss |
[-Passphrase sssssssssss] | [-keyID
kkkkkkkkkkk] -aN
MegaCli -VerifySecurityKey
-SecurityKey sssssssssss -aN
MegaCLI -DestroySecurityKey |
[-Force] -aN
MegaCli -SetKeyID -KeyID
kkkkkkkkkkk -aN
MegaCLI Command
MegaCli –LDInfo –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli –LDSetProp WT | WB|NORA
|RA |
ADRA|-Cached|Direct|CachedBadBBU|
NoCachedBadBBU} | -RW|RO|Blocked |
{-Name nameString}
|-EnDskCache|DisDskCache –Lx|
-L0,1,2|-Lall -aN|-a0,1,2|-aALL
MegaCli -LDSetPowerPolicy
-Default| -Automatic| -None|
-Maximum| -MaximumWithoutCaching
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli -getLdExpansionInfo
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
MegaCli -LdExpansion -pN
-dontExpandArray -Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
Appendix C: MegaCLI Commands to StorCLI Command Conversion
storcli /cx set
SecurityKey=XXXXXX [passphrase=yyyyy]
[keyId=zzzz]
storcli /cx set
SecurityKey=XXXXXX OldSecurityKey=yyyy
y
storcli /cx compare SecurityKey=xxxxxx
storcli /cx delete SecurityKey
storcli /cx set SecurityKey KeyId=xxxx
storcli /cx/v(x|all) show
storcli /cx/v(x|all) show all
storcli /cx/v(x|all) set
wrcache=WT|WB|AWB
storcli /cx/v(x|all) set rdcache=RA|NoRA
storcli /cx/v(x|all) set
iopolicy=Cached|Direct
storcli /cx/v(x|all) set
accesspolicy=RW|RO|Blocked|RmvBlkd
storcli /cx/v(x|all) set
pdcache=On|Off|Default
storcli /cx/v(x|all) set
name=<NameString>
storcli /cx/v(x|all) set
ds=Default|Auto|None|Max|MaxNoCache
storcli /cx/v(x|all) show expansion
storcli /cx/v(x|all) expand Size=<value>
[expandarray]
LSI Corporation
- 392 -
Battery Commands
StorCLI Command
StorCLI Command