Chapter 6: Storcli; Overview; Support For Megacli Commands; Devices Supported By The Storcli Tool - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014

Chapter 6: StorCLI

6.1

Overview

The Storage Command Line Tool (StorCLI) is the command line management software designed for the MegaRAID
product line. The StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to script.
This chapter provides information on installing and using the StorCLI and explains the various features of the StorCLI.
6.2

Support for MegaCLI Commands

The MegaCLI commands can be executed on the StorCLI tool. A single binary is output for the StorCLI commands and
its equivalent MegaCLI commands. See
conversion from MegaCLI commands to StorCLI commands.
6.3

Devices Supported by the StorCLI Tool

The StorCLI tool is designed to work with the MegaRAID product line. The StorCLI tool supports the following
MegaRAID products.
The 936x product line.

MegaRAID SAS 9360-4i

MegaRAID SAS 9360-8i

MegaRAID SAS 9380-4i4e

MegaRAID SAS 9380-8e

MegaRAID SAS 9361 -8i

MegaRAID SAS 9361-4i

6.4

Installation

The MegaRAID controllers can be used with the following operating systems for Intel and AMD 32-bit and 64-bit
x86-based motherboards:
Microsoft® Windows Server 2008 R2

Microsoft Windows 7 (32/64 bit)

Microsoft Windows 8.1

Red Hat® Enterprise Linux® 5.8 (32/64 bit)

Red Hat Enterprise Linux 5.9

Red Hat Enterprise Linux 6.1

Red Hat Enterprise Linux 6.2 (32/64 bit)

Oracle Linux 6.4

SUSE® Linux Enterprise Server 11 SP2 (32/64 bit)

NOTE The legacy commands are deprecated from this guide.
MegaCLI Commands to StorCLI Command Conversion
LSI Corporation
- 155 -
Chapter 6: StorCLI
Overview
for the information for