12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
B.1
System Commands
Table 58 System Commands
Description
Show a general summary of all
detected controllers.
B.2
Controller Commands
Table 59 Controller Commands
Description
Show all information about the adapter,
such as cluster state, BIOS, alarm,
firmware, version, and so on.
Download the firmware to all
compatible controllers that can be
flashed with the image. By default, CLI
checks for signature and version.
Show the status of properties related to
the controllers.
3ware CLI Command
tw_cli show
3ware CLI Command
tw_cli /cx show all
/cx update
fw=filename_with_path
[force]
/cx show <PropertyName>
The following properties can be used
with this command:
a0,1,2|-aALL
achip
AENs [reverse]
alarms [reverse]
allunitstatus
autocarve
autorebuild
bios
carvesize
ctlbus diag
dpmstat [type=<inst|ra|ext> cacheflushint
driver
drivestatus
events [reverse]
exportjbod firmware
memory
model
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
show
show ctrlcount
/cx show all
/cx download src=filepath [nosigchk]
[noverchk]
/cx show <PropertyName>
The following properties can be used with this command:
abortcconerror
activityforlocate
alarm
autorebuild
backplane
batterywarning
bgirate
bootwithpinnedcache
cachebypass
ccrate
clusterenable
coercion
copyback
directpdmapping
ds
LSI Corporation
- 374 -
StorCLI Command
StorCLI Command