12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
C.1
System Commands
Table 68 System Commands
Description
Show the software version.
Show help information.
Show the number of controllers connected.
C.2
Controller Commands
Table 69 Controller Commands
Description
Show the status of
properties related to the
controllers.
MegaCLI -v
MegaCLI -help|-h|?
MegaCLI -adpCount
MegaCLI Command
MegaCli -AdpGetProp
<PropertyName>-aN|-a0,1,2|-aALL
The following properties can be used with this
command:
abortcconerror
alarmdsply
autodetectbackplanedsbl
autoenhancedimportdsply
autosnapshotspace
batwarndsbl
bgirate
bootwithpinnedcache
cachebypass
ccrate
clusterenable
coercionmode
copybackdsbl
defaultldpspolicy
defaultsnapshotspace
defaultviewspace
disableldpsinterval
disableldpstime
disableocr
eccbucketcount
eccbucketleakrate
enableeghsp
enableesmarter
MegaCLI Command
/cx show <propertyName>
The following properties can be used with this command:
abortcconerror
alarm
backplane
foreignautoimport
batterywarning
bgirate
bootwithpinnedcache
cachebypass
ccrate
coercion
copyback
ds
ds
ds
ocr
eccbucketsize
eccbucketleakrate
eghs
eghs
LSI Corporation
- 385 -
Appendix C: MegaCLI Commands to StorCLI Command Conversion
StorCLI Command
storcli -v
storcli -help|-h|?
storcli show ctrlcount
StorCLI Command