Lenovo ThinkServer RD650 User Manual page 401

12Gb/s MegaRAID SAS Software User Guide
March 2014
Number
0x1c
0x1d
0x1e
0x1f
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x2d
0x2e
0x2f
0x30
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3a
0x3b
0x3d
0x3e
0x3f
0x40
0x41
0x42
0x43
0x44
0x45
0x46
0x47
Event Text
LD Rebuild is in progress
LD is undergoing reconstruction
LD RAID level is wrong for requested operation
Too many spares assigned
Scratch memory not available - try command again later
Error writing MFC data to SEEPROM
Required HW is missing (i.e. Alarm or BBU)
Item not found
LD drives are not within an enclosure
PD CLEAR operation is in progress
Unable to use SATA(SAS) drive to replace SAS(SATA)
Patrol Read is disabled
Given row index is invalid
SCSI command done, but non-GOOD status was received-see mf.hdr.extStatus for SCSI_STATUS
IO request for MFI_CMD_OP_PD_SCSI failed - see extStatus for DM error
Matches SCSI RESERVATION_CONFLICT
One or more of the flush operations failed
Firmware real-time currently not set
Command issues while firmware in wrong state (i.e., GET RECON when op not active)
LD is not OFFLINE - IO not possible
Peer controller rejected request (possibly due to resource conflict)
Unable to inform peer of communication changes (retry might be appropriate)
LD reservation already in progress
I2C errors were detected
PCI errors occurred during XOR/DMA operation
Diagnostics failed - see event log for details
Unable to process command as boot messages are pending
Returned in case if foreign configurations are incomplete
Returned in case if a command is tried on unsupported hardware
CC scheduling is disabled
PD CopyBack operation is in progress
Selected more than one PD per array
Microcode update operation failed
Unable to process command as drive security feature is not enabled
Controller already has a lock key
Lock key cannot be backed-up
Lock key backup cannot be verified
Lock key from backup failed verification
Rekey operation not allowed, unless controller already has a lock key
LSI Corporation
- 401 -
Appendix E: CLI Error Messages