Lenovo ThinkServer RD650 User Manual page 139

12Gb/s MegaRAID SAS Software User Guide
March 2014
The following table describes all of the virtual drive properties listed in this dialog.
Table 29 Virtual Drive Properties
Property
Logical Sector Size
Segment Size
Starting Logical Block
Addressing (LBA)
Bad Blocks
SSD Caching
Following the virtual drive properties listed in the dialog are virtual drive policies that you can select and change. To
change any policy, highlight the field, press Enter, and select a value from the pop-up menu. When you finish
changing policy settings, highlight Apply Changes at the top or the bottom of the selections and press Enter.
The following table describes the virtual drive policies.
NOTE The red arrow appears when there is too much information to display
in one dialog. The amount of information that can be displayed in one
dialog depends on the capabilities of the HII browser.
The logical sector size of this virtual drive. The possible options are 4 KB and 512 B.
The segment size used on this virtual drive.
The address of the first location of a block of data stored on the virtual drive.
Indicates whether the virtual drive is secured.
Indicates whether the virtual drive has bad blocks.
Indicates whether solid-state disk (SSD) caching is enabled on this virtual drive.
Description
LSI Corporation
- 139 -
Chapter 5: The HII Configuration Utility
Managing Virtual Drives