Lenovo ThinkServer RD650 User Manual page 357

12Gb/s MegaRAID SAS Software User Guide
March 2014
Number
0x0025 Information
0x0026 Information
0x0027 Information
0x0028 Information
0x0029 Information
0x002a Information
0x002b Information
0x002c Information
0x002d Information
0x002e Warning
0x002f Warning
0x0030 Information
0x0031 Fatal
0x0032 Fatal
0x0033 Critical
0x0034 Progress
0x0035 Information
0x0036 Information
0x0038 Warning
0x0039 Warning
0x003a Information
0x003b Information
0x003c Fatal
0x003d Critical
0x003e Fatal
Severity
Event Text
Level
Patrol Read Rate changed to %d%% Logged to indicate progress of patrol read in percentage.
Patrol Read resumed
Patrol Read started
Reconstruction rate changed to
%d%%"
Drive group modification rate
changed to %d%%
Shutdown command received from
host
Test event: %s
Time established as %s; (%d seconds
since power on)
User entered firmware debugger
Background Initialization aborted on
%s
Background Initialization corrected
medium error (%s at %lx
Background Initialization completed
on %s
Background Initialization completed
with uncorrectable errors on %s
Background Initialization detected
uncorrectable double medium errors
(%s at %lx on %s)
Background Initialization failed on
%s
Background Initialization progress
on %s is %s
Background Initialization started on
%s
Policy change on %s from %s to %s
Consistency Check aborted on %s
Consistency Check corrected
medium error (%s at %lx
Consistency Check done on %s
Consistency Check done with
corrections on %s
Consistency Check detected
uncorrectable double medium errors
(%s at %lx on %s)
Consistency Check failed on %s
Consistency Check completed with
uncorrectable data on %s
Generic Conditions when Each Event Occurs
Logged when patrol read is resumed.
Logged when patrol read is started.
Logged to indicate progress of reconstruction in percentage.
Logged to indicate the change in Drive group modification
frequency.
Logged when shutdown command is received from host to
controller.
General controller event, with a generic string.
Logged when controller time was set from host, also
displaying time since power on in seconds.
Logged when user enters controller debug shell.
Logged to inform about user aborted background
initialization on displayed LD number.
logged to inform about corrected medium error on displayed
LD number, LBALBA number, PD number and PDLBA number
in that order.
Logged to inform Background Initialization completion on
displayed LD.
Logged to inform Background Initialization completion with
error on displayed LD.
Logged to inform Background Initialization completion with
double medium error on displayed PD, PDLBA and LD in that
order.
Logged to inform Background Initialization failure on
displayed LD.
Logged to inform Background Initialization progress in
percentage of displayed LD.
Logged to inform Background Initialization started for
displayed LD.
Logged to inform the changed policy for displayed LD with
old and new policies.
Logged to inform aborted Consistency check for displayed
LD.
Logged when Consistency check corrected medium error.
Logged when Consistency check has completed successfully
on the LD.
Logged when Consistency check completed and
inconsistency was found during check and was corrected.
Logged when uncorrectable double medium error are
detected while consistency check.
Logged when Consistency check failed as fatal error was
found.
Logged when Uncorrectable error occurred during
consistency check.
LSI Corporation
- 357 -
Appendix A: Events and Messages