Performing Drive Operations - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 103 Drive Management
The preceding dialog lists the following basic drive properties for the selected drive:
Table 31 Basic Physical Drive Properties
Property
Drive ID
Status
Size
Type
Model
Hardware Vendor
Associated Virtual Drive
For information on performing drive operations, see
For information on viewing and changing drive settings and properties, see
5.6.1

Performing Drive Operations

When you highlight the Select operation field, press Enter and a pop-up drive operations menu appears.
The ID of the currently selected drive. The format of the ID is Connector: Port wired order: Slot. If the
drive is not installed in an enclosure, the format of the ID is Connector: Port wired order.
The status of the drive, such as Online, Ready, Available, or Failed.
The drive capacity, in GB.
The device type of the drive, which is normally Disk.
The model number of the drive.
The hardware vendor of the drive.
If this physical drive is currently used in a virtual drive, this field lists information about the virtual drive.
Highlight this field and press Enter to view a popup window with additional information about the
virtual drive.
LSI Corporation
- 141 -
Description
Performing Drive Operations.
Viewing Advanced Drive
Chapter 5: The HII Configuration Utility
Managing Physical Drives
Properties.