Engine Service Mode; Service Mode Table; Sp1-Xxx (Feed) - Ricoh J-P3 Service Manual

ENGINE SERVICE MODE

5.3 ENGINE SERVICE MODE

5.3.1 SERVICE MODE TABLE

SP1-XXX (Feed)

1001 [Lead Edge Reg.] Leading Edge Registration
(Paper Type, [Color], Process Speed), Paper Type -> N: Normal, OHP, TH: Thick
1001 001 N [K]: L
1001 002 N [K]: M
1001 003 N [K]: H
1001 004 N [FC]: L
1001 005 N [FC]: M
1001 006 TH [K]
1001 007 TH [FC]
1001 008 OHP [K]
1001 009 OHP [FC]
1002 [S-to-S Reg.] Side-to-Side Registration
1002 001 By-pass Table
1002 002 Paper Tray 1
1002 003 Paper Tray 2
1002 004 Paper Tray 3
1002 005 Paper Tray 4
1002 006 Duplex
1003 [Paper Buckle] Paper Buckle
(Paper Tray or By-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH:
Thick
1003 001 P: L
1003 002 P: M
1003 003 P: H
1003 004 B N: L
1003 005 B N: M
1003 006 B N: H
1003 007 B TH
1003 008 B OHP
1004 [Dev. Mt Speed] Development Drive Motor Speed
([Color], Process Speed, Paper Type), Paper Type -> N: Normal, TH: Thick
Adjusts the development drive motor speed for correcting color shifts at the leading
edge or trailing edge area.
Black Motor [K]:
Adjusts fusing roller speed for the trailing edge area.
Color Motor [YMC]:
Adjusts registration roller speed for the leading edge area.
NOTE:
• SP1-004-002 and 005 is for color mode. Fine adjustment for B&W mode can be
done with SP1-005-001 and 002.
• SP1-004-004 is for normal paper. Fine adjustment for thick paper can be done
with SP1-005-003.
1004 001 [K]: L: N
1004 002 [K]: M
*BCU Adjusts the leading edge registration. This SP
changes the registration clutch operation timing.
*BCU
[-10.0 to 10.0 / 0.0 / 0.1 mm/step] FA
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU Adjusts the side-to-side registration. This SP
changes the laser main scan start position.
*BCU
[-10.0 to 10.0 / 0.0 / 0.1 mm/step] FA
*BCU
*BCU
*BCU
*BCU
*BCU Adjusts the amount of paper buckle at the
registration roller. This SP changes the paper feed
*BCU
timing.
*BCU
[-10 to 10 / 0 / 1 mm/step]
*BCU
*BCU
*BCU
*BCU
*BCU
*BCU [96.0 to 104.0 / 100.0 / 0.1 %/step]
*BCU
5-8
20 February 2004