Ricoh J-P3 Service Manual page 130

ENGINE SERVICE MODE
5404 [UCodeCtrClr] Use Code Counter Clear
Clears all counters for users.
5501* [PM Alarm]
Sets the PM alarm level. A PM alarm is made when this condition occurs: PA x
1000 = PC, where PA is the value set in SP5-501 and PC is the value in the PM
counter. This SP is for use with NRS.
5504 [Jam Alarm]
Sets the jam alarm level. If a paper jam occurs, the jam alarm counter increases by
+1. If no paper jam occurs while the set number of paper is output, the jam alarm
counter decreases by -1. The jam alarm occurs when the jam alarm counter gets to
+10. This SP is for use with NRS.
5505 [Error Alarm]
Sets the error alarm level. If an SC code occurs, the error alarm counter increases
by +1. If no SC code occurs while the set number of paper is output, the jam alarm
counter decreases by -1. The error alarm occurs when the error alarm counter
reaches +5. This SP is for use with NRS.
5507 [Supply Alarm]
Enables or disables the supply alarm.
5507 001 Paper Supply Alarm
5507 002 Staple Supply Alarm
5507 003 Toner Supply Alarm
Sets the supply alarm level. A supply alarm counter increases by +1 when a sheet of the related
size is used. The supply alarm occurs when one of the supply alarm counters gets to the set
value. This SP is for use with NRS.
5507 128 Interval: Others
5507 132 Interval: A3
5507 133 Interval: A4
5507 134 Interval: A5
5507 141 Interval: B4
5507 142 Interval: B5
5507 160 Interval: DLT
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
5801 [Memory Clear] (☛ 5.3.2)
5801 001 All
5801 002 ENG All
5801 003 SCS
5801 004 IMH
5801 005 MCS
5801 008 PRT
*CTL [0 to 9999 / 0 / 1/step]
0: Disables the PM alarm
*CTL [0 to 3 / 3 / 1/step]
3: 6K, 2: 3K, 1: 1.5K, 0: Disables the jam alarm
*CTL [0 to 255 / 50 / 1/step]
0: Disables the PM alarm
*CTL [0 to 1 / 0 / 1/step]
0: OFF, 0: ON
*CTL
*CTL
*CTL [250 to 10000 / 1000 / 1/step]
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
Executes SP5-801-002 through 014.
Resets or deletes the engine-related data.
Clears the system settings.
Clears IMH data. DFU
Clears MCS data. DFU
Clears the printer application settings.
5-34
20 February 2004