Engine Service Mode; Sp1-Xxx (Feed) - Ricoh G190 Service Manual

Service Mode Table

5.2.2 ENGINE SERVICE MODE

SP1-XXX (Feed)

[Lead Edge Reg.] Leading Edge Registration
(Tray or By-pass, Paper Type, Process Speed)
Paper Type ->N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick
paper 2 (see the Specifications table for details on these paper weights)
Process Speed: LS: Low speed, RS: Regular speed
1001
1001 001 Tray 1: Normal: LS
1001 002 Tray 1: Normal: RS
1001 003 Tray 1: Thick
1001 004 Tray 1: OHP
1001 005 Tray 2: Normal: LS
1001 006 Tray 2: Normal: RS
1001 007 Tray 2: Thick
1001 008 Tray 2: OHP
1001 009 Tray 3: Normal: LS
1001 010 Tray 3: Normal: RS
1001 011 Tray 3: Thick
1001 012 Tray 3: OHP
G190
Adjusts the leading edge registration. This SP changes the
registration clutch operation timing for each mode.
A +ve value sets the registration start timing earlier.
A –ve value sets the registration start timing later. The value of the
normal paper in RS is the standard value. The values of papers
other than normal are added to the value of the normal paper in RS.
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
*EGB
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
[-10.0 to 10.0 / -3.0 / 0.1 mm/step]
[-10.0 to 10.0 / 1.5 / 0.1 mm/step]
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
[-10.0 to 10.0 / -3.0 / 0.1 mm/step]
[-10.0 to 10.0 / 1.5 / 0.1 mm/step]
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
[-10.0 to 10.0 / -3.0 / 0.1 mm/step]
[-10.0 to 10.0 / 1.5 / 0.1 mm/step]
[-10.0 to 10.0 / 0.0 / 0.1 mm/step]
5-14 SM