Installation Flow Chart - Ricoh J-P3 Service Manual

PRINTER

1.3.2 INSTALLATION FLOW CHART

The flow chart shows the installation procedure.
Start
Unpack the printer.
The paper feed
unit or LCT to be installed?
Yes
Place the printer on the paper feed unit or
LCT, and install it.
The controller options to be
installed?
Yes
Install the controller options.
The duplex unit to be installed?
Yes
Install the duplex unit.
A
The two-tray finisher and the booklet finisher require
tray unit or the LCT. Each punch unit is dedicated to the two-tray finisher or the booklet finisher.
The punch unit to be installed?
No
No
No
No
No
Specify the settings relevant to the
contract (see section 1.3.3).
B
➀ the duplex unit and
1-6
20 February 2004
A
The two-tray finisher
or booklet finisher to be
installed?
Yes
Yes
Install the punch unit.
Install the finisher.
Install the printer.
End
➁ an optional paper
B
G106I904.WMF