Ricoh J-P3 Service Manual page 107

20 February 2004
1105 009 H: N[FC] S: M
1105 010 H: N[FC] D: L
1105 011 H: N[FC] D: M
1105 013 H: OHP
1105 015 P: N [K] S: M
1105 017 P: N [K] D: M
1105 019 P: N[FC] S: L
1105 020 P: N[FC] S: M
1105 021 P: N[FC] D: L
1105 022 P: N[FC] D: M
1105 024 P: OHP
1105 026 H: TH
1105 028 P: TH
1105 029 H: Envelop
1105 030 P: Envelop
1105 031 H: Offset Temp
Sets the heating roller temperature for the printing start condition when changing the
process speed.
Fusing temperature must be decreased when the machine changes to a process
speed that is slower than the current process speed (for example, when the speed
changes from 162 mm/s to 62.5 mm/s). The machine idles while reducing the fusing
temperature. When the fusing temperature becomes lower than the ready
temperature, the machine starts printing.
Ready Temperature = Target temperature + Temperature specified in this SP mode.
1105 032 P: Offset Temp
Sets the pressure roller temperature for the printing start condition when changing
the process speed.
1105 033 H: SP: L
1105 034 H: SP: M
1105 035 H: SP: H
1105 036 P: SP: L
1105 037 P: SP: M
1105 038 P: SP: H
1105 051 H: N [K] S: L
1105 052 H: N [K] D: L
1105 053 P: N [K] S: L
1105 054 P: N [K] D: L
1106 [Temp. Display] Fusing Temperature Display (Heating or Pressure)
Displays the current temperature of the heating and pressure rollers.
1106 001 H Roller
1106 002 P Roller
1902 [Paper Size] Tray Paper Size
1902 001 Tray 1 A4/LT
Specifies the paper size for tray 1. Tray 1 can only use these two sizes.
US: 1 FA
1902 002 Tray 2 B4/LG
Specifies the paper size for tray 2. This specifies which size is detected for a sensor
output of 1101 (see section 6 for details).
US: 1 FA
*BCU [100 to 190 / 185 / 5°C/step]
*BCU [100 to 190 / 140 / 5°C/step]
*BCU [100 to 190 / 180 / 5°C/step]
*BCU [100 to 190 / 160 / 5°C/step]
*BCU [0 to 190 / 160 / 5°C/step]
*BCU [0 to 190 / 155 / 5°C/step]
*BCU [0 to 190 / 125 / 5°C/step]
*BCU [0 to 190 / 160 / 5°C/step]
*BCU [0 to 190 / 120 / 5°C/step]
*BCU [0 to 190 / 155 / 5°C/step]
*BCU [0 to 190 / 145 / 5°C/step]
*BCU [0 to 190 / 170 / 5°C/step]
*BCU [0 to 190 / 150 / 5°C/step]
*BCU [0 to 190 / 170 / 5°C/step]
*BCU [0 to 190 / 150 / 5°C/step]
*BCU [1 to 20 / 5 / 1°C/step]
*BCU [1 to 20 / 10 / 1°C/step]
*BCU [-20 to +30 / -10 / 1°C/step]
*BCU [-20 to +30 / -10 / 1°C/step]
*BCU [-20 to +30 / +10 / 1°C/step]
*BCU [-20 to +30 / -10 / 1°C/step]
*BCU [-20 to +30 / -10 / 1°C/step]
*BCU [-20 to +30 / +20 / 1°C/step]
*BCU [100 to 190 / 145 / 5°C/step]
*BCU [100 to 190 / 140 / 5°C/step]
*BCU [100 to 190 / 125 / 5°C/step]
*BCU [100 to 190 / 120 / 5°C/step]
[0 to 200 / - / 1°C/step]
*BCU [0 or 1 / 0 / -] Alphanumeric
0: A4 sideways, 1: LT sideways
*BCU [0 or 1 / 0 / -] Alphanumeric
0: B4 lengthwise, 1: LG lengthwise
5-11
ENGINE SERVICE MODE