Memory Clear/Counter Clear - Ricoh J-P3 Service Manual

20 February 2004

5.3.2 MEMORY CLEAR/COUNTER CLEAR

The table lists the data that is reset or deleted with SP5-801, SP5-998, and SP7-
808. The serial number information, meter charge setting (SP5-930), and meter
charge counters (SP8-58x) are not cleared.
NOTE: In this section (5.3.2), the letter "x" represents a whole number from "0" to
"9".
Service Program
5801 003 Memory Clear > SCS
5801 004 Memory Clear > IMH
5801 005 Memory Clear > MCS
5801 008 Memory Clear > PRT
5801 011 Memory Clear > NCS
5998 001 Memory Clear > ENG Setting
5998 002 Memory Clear > ENG Counter
7808 001 Counter Clear
Reset or Deleted
SP5-009, 101, 104, 305, 812, 833, 961, 970
SP7-401, 502, 504, 506, 507
SP8-00x, 02x, 03x, 06x, 07x, 42x, 43x, 44x, 451,
46x, 471, 48x, 51x, 52x, 771, 781, 801, 831,
841, 851, 861, 871, 881, 891, 901, 941
No SP modes are cleared. All files stored in the
HDD are deleted.
No SP modes are cleared.
Service settings:
• Bit switches
• Gamma settings (User & Service)
• Toner Limit
User settings:
• Tray Priority
• Menu Protect
• System Setting other than energy saver settings
• I/F Setup (I/O Buffer and I/O Timeout)
• PCL Menu
All setting of Network Setup (User Menu)
All engine related SP modes other than the
following:
• Serial number information
• SP modes related to meter charge
• Counters and logging data
All counters and logging data related to engine
SP7-502, 504, 506, and 507
SP8-00x, 02x, 03x, 06x, 07x, 42x, 43x, 44x, 451,
46x, 471, 48x, 51x, 52x, 771, 781, 801, 831,
841, 851, 861, 871, 881, 891, 901, 941
5-65
ENGINE SERVICE MODE