Ricoh J-P3 Service Manual page 84

SC TABLE
SC No. Item
SC 743 Booklet finisher • The front-jogger-fence
front jogger
fence motor
error
• The front-jogger-fence
SC 744 Booklet finisher • The rear-jogger-fence
rear jogger
fence motor
error
• The rear-jogger-fence
Definition
• Incorrect assembling
home-position sensor does
not turn off within 3 seconds
after the front-jogger-fence • Loose connection of
motor starts.
home-position sensor does • Defective front-
not turn on within 3 seconds
when the front-jogger-fence
motor is driving the fence to • Loose connection of
its home position.
• Incorrect assembling
home-position sensor does
not turn off within 3 seconds
after the rear-jogger-fence • Loose connection of
motor starts.
home-position sensor does • Defective rear-jogger-
not turn on within 3 seconds
when the rear-jogger-fence
motor is driving the fence to • Loose connection of
its home position.
Related
Possible Cause
SCs
of the front jogger
fence
the front jogger fence
motor
jogger-fence home-
position sensor
the front-jogger-fence
home-position sensor
of the rear jogger
fence
the rear jogger fence
motor
fence home-position
sensor
the rear-jogger-fence
home-position sensor
4-10
Troubleshooting Procedure
1. Turn the main switch off and on.
2. Check the connection of the front
jogger fence motor.
3. Check the connection of the front-
jogger-fence home-position sensor.
4. Replace the front-jogger-fence home-
position sensor.
5. Replace the front jogger fence motor.
1. Turn the main switch off and on.
2. Check the connection of the rear
jogger fence motor.
3. Check the connection of the rear-
jogger-fence home-position sensor.
4. Replace the rear-jogger-fence home-
position sensor.
5. Replace the rear jogger fence motor.
20 February 2004
Type
B
B