Printer Engine Service Mode; Service Mode Table; Sp1-Xxx: Feed - Ricoh M080 Service Manual

3.2 PRINTER ENGINE SERVICE MODE

3.2.1 SERVICE MODE TABLE

Notation
[range/default/step]
DFU

SP1-xxx: Feed

Lead Edge Regist
Adjusts the printing leading edge registration for feeding from the trays and
1001
duplex tray using the trimming area pattern (SP5-902-003 No.9).
Push [ ] or [
The specification is 4±2 mm
1001 001 Bypass Tray Plain
1001 002 Bypass Tray Thick
1001 003 Main Tray Plain
1001 004 Main Tray Thick
1001 005 Optional Tray
1001 006 Duplex
SM Appendix
What it means
Example: [-9 to +9/+3.0/0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
Denotes "Design or Factory Use". Do not change this value.
Leading Edge Registration
] to select the settings (plus or minus).
[-40 to +40/0/1]
3-9
Printer Engine Service Mode
M080