3.1.2 PRINTER ENGINE SERVICE MODE
Service Mode Table
Notation
[range / default / step]
Bold
DFU
Japan only
SM Appendix
CÓPIA NÃO CONTROLADA
What it means
Example: [-9 to +9 / 3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
Comments added for reference.
Denotes "Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this
value.
3-9
CÓPIA NÃO CONTROLADA
SP Tables
M047