Transfer Unit Drive Motor - Ricoh J-P3 Service Manual

TRANSFER AND PAPER TRANSPORT UNIT

3.5.4 TRANSFER UNIT DRIVE MOTOR

1. Pull out the transfer unit
(☛ 3.5.1).
2. Transfer belt cleaning unit
(☛ 3.5.2)
3. Release lever [A] (! x 1)
4. Front cover [B] (! x 3)
5. Front plate [C] (! x 5, " x 1,
Timing belt x 1)
6. Transfer unit drive motor [D]
(! x 2, " x 1)
Reassembling
Before you attach the screw at the
left end [E], check that the timing
belt [F] is sufficiently tight. The
screw [E] adjusts the position of the
roller [G]. This roller pushes the
timing belt [H], to make sure that the
belt tightly engages with the drive
motor [I] and the drive gear [J].
[B]
[A]
[F]
[C]
[E]
[D]
[G]
[E]
[I]
3-14
20 February 2004
G106R943.WMF
G106R944.WMF
[J]
[H]
G106R932.WMF