Pressure Roller - Ricoh J-P3 Service Manual

20 February 2004

3.7.2 PRESSURE ROLLER

[C]
[D]
[E]
G106R915.WMF
1. Pressure roller fusing lamp (☛ [P2] 3.9.10)
2. Lower paper guide plate (☛ [P2] 3.9.8)
3. Drive gear holder [A] (! x 1)
4. Drive gear [B] ($ x 1)
5. Lower right cover (☛ [P2] 3.9.9)
6. Connector bracket [C] with the connector (! x 1)
7. Pads [D]
8. Release the fuse base [E] from the frame (! x 1).
NOTE: It is not necessary to remove the cables.
9. Thermistor (☛ [P2] 3.9.9)
NOTE: To prevent damage to the thermistor, remove the thermistor before you
remove the pressure roller unit.
10. Pressure roller unit [F] (! x 4)
NOTE: When you reassemble the machine, make sure that the pressure roller
unit does not cause damage to the cables.
[F]
[B]
3-17
FUSING
[A]