General Specifications - Ricoh J-P3 Service Manual

20 February 2004
SPECIFICATIONS

1. GENERAL SPECIFICATIONS

Configuration:
Print Process:
Printer Languages:
Resolution:
Gradation
Printing speed:
Resident Fonts:
Host Interfaces:
Network Protocols:
First Print Speed:
Warm-up Time
Print Paper Capacity:
2
(80 g/m , 20 lb)
Desktop
Dry electrostatic transfer system
RPCS (Refined Printing Command Stream),
PCL5c,
Adobe PostScript 3
True 1200 x 1200 dpi, 1200 x 600 dpi,
600 x 600 dpi, 600 x 600 dpi (2 bit)
NOTE: The resolution 600 x 600 dpi (2 bit) is supported
only by PCL5c.
1 bit/pixel
Resolution
Monochrome 600 x 600 dpi
1200 x 600 dpi
1200 x 1200 dpi
Color 600 x 600 dpi
1200 x 600 dpi
1200 x 1200 dpi
PCL5c:
35 Intelli fonts
10 TrueType fonts
1 bitmap font
Adobe PostScript 3:
136 fonts (24 Type 2 fonts, 112 Type 14 fonts)
USB...................................................................... Standard
Ethernet (100 Base-TX/10 Base-T)...................... Standard
Bi-directional IEEE1284 parallel x 1 ..................... Optional
IEEE 1394 ............................................................ Optional
IEEE 802.11b (Wireless LAN) .............................. Optional
Bluetooth (Wireless)............................................. Optional
TCP/IP, IPX/SPX, NetBEUI, AppleTalk
8 seconds or less (from tray 1)
Less than 99 seconds (at 23°C/50%)
Standard tray: 500 sheets x 2
By-pass tray: 100 sheets
Optional paper feed tray: 500 sheets x 1, 500 sheets x 2,
Optional LCT: 2000 sheets
SPEC-1
SPECIFICATIONS
Plain paper Thick/OHP
35 ppm 10 ppm
35 ppm 10 ppm
14 ppm 10 ppm
35 ppm 10 ppm
35 ppm 10 ppm
14 ppm 10 ppm