Ricoh J-P3 Service Manual page 52

LASER OPTICS
18. Duct [A]
19. Securing screws for the laser optics housing unit [B] (! x 2)
NOTE: When reassembling, attach the ground cable [C].
20. Put a sheet of paper [D] between the laser optic housing unit and the machine
rear frame.
NOTE: This ensures that the cables are not caught by the brackets when you
lift the laser optics housing unit.
21. Hold the unit with both hands and lift it up slowly, making sure that the flat
cables from the laser diode board are not caught by the brackets.
NOTE: If you roughly remove the unit, the cables can be caught by the
brackets and the laser diode board may be damaged.
22. Do SP5-993-002 (Line Adjustment > Execute) or Auto Adjustment in the User
Tools (Maintenance > Color Regist. > Auto Adjust. > Now).
[B]
[A]
[C]
G106R906.WMF
3-6
20 February 2004
[D]