User Program Mode; Starting A User Program; Quitting A User Program; Menu List - Ricoh J-P3 Service Manual

20 February 2004

5.7 USER PROGRAM MODE

Starting a User Program

1. Push the menu key to start the user program mode.
2. Use the up arrow key and the down arrow key to select a program.
3. Push the enter key to start the program.
NOTE: To return to step 1, press the escape key one or more times.

Quitting a User Program

Push the online key or push the escape key one or more times until "ready" is
shown.

Menu List

For more, print the menu list (Menu > List/Test Print > Menu List).
Paper Input
• Bypass Size
• Tray Paper Size
• Paper Type
• Tray Locking
• Tray Priority
List/Test Print
• Config. Page/Error Log
• Config. Page
• Error Log
• Menu List
• Color Demo Page
• PCL Config. Page
• PS Config. Page
• PDF Config. Page
• Hex Dump
• Operations Test
Maintenance
• Color Registration
• Color Calibrate
• Image Density
• Registration
• 4C. Graphic Mode
• Key Repeat
System
• Print Error Report
• Auto Continue
• Memory Overflow
• Copies
• Printer Language
• Sub Paper Size
• Page Size
• Def. Printer Language
• Output Tray
• Energy Saver 1
• Energy Saver 2
• Unit of Measure
• B&W Page Detect
• Letterhead Mode
• RAM Disk
• Notify by Email
Host Interface
• I/O Buffer
• I/O Timeout
• Network Setup
5-87
USER PROGRAM MODE
PCL Menu
• Orientation
• Form Lines
• Font Source
• Font Number
• Point Size
• Font Pitch
• Symbol Set
• Courier Font
• Ext. A4 Width
• Append CR to LF
• Resolution
PS Menu
• Data Format
• Resolution
• Color Setting
• Color Profile
PDF Menu
• PDF: Change PW
• PDF Group PW
• Resolution
• Color Setting
• Color Profile
Language