Sd Card Appli Move; Overview - Ricoh J-P3 Service Manual

SD CARD APPLI MOVE

5.5 SD CARD APPLI MOVE

5.5.1 OVERVIEW

The service program "SD Card Appli Move" (SP5-873) enables you to copy
application programs from an SD card to another SD card.
There are three SD card slots. Model J-P3 can use slot 2 and slot 3 to store
application programs. Slot 1 is for maintenance work only. Because of this, if the
application programs are stored in three SD cards or more,
or two from these SD cards and
or two cards.
Use extreme caution when using SD Card Appli Move:
1. The authentication data is transferred with the application program from an SD
card to the other SD card. Authentication fails if you try to use the SD card after
you copy the application program from this card to another SD card.
2. Do not use an SD card if it has been used for some other work, for example, on
a computer. Normal operation is not guaranteed when such SD card is used.
3. Keep the SD card in a safe place after you copy the application program from
the card to another card. This is because:
that the user is licensed to use the application program.
check the SD card and its data to solve a problem in the future.
4. You cannot copy PostScript data to another SD card. You can copy an
application program to the SD card that stores PostScript data.
➁
store all the application programs on these one
➀ The SD card can be the only proof
5-82
20 February 2004
➀
choose one SD card
➁
You may need to