Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2.
Release the hooks (x2) on the bottom of the printer. (See
3.
Lift the Housing Front Left slightly and release the ribs (x2) and dowel (x1),
and remove the Housing Front Left while avoiding the lever of the
Electromagnetic Plunger from the hole of the Housing Front Left.
Bottom
Hook
Figure 9-24. Removing the Housing Front Left
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Fig.
9-24.)
9.4.2.10 Panel Unit
Frame
Hole
Rib
Housing Front Left
Dowel
C.B.P. 3x10 (6±1Kgfcm)
Disassembly/assembly
This section describes the disassembly/reassembly procedures of the
C H E C K
Panel Unit for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see
"9.4.2.18 Panel Unit" (p.311)
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Decoration Plate Left Upper Sub/Paper Guide Top Assy/
Upper Housing/Decoration Plate Left Upper
Removal procedure
1.
Remove the screws (x2) that secure the Panel Unit.
Upper Housing
Panel Unit
Figure 9-25. Removing the Panel Unit (1)
Revision G
for the procedures.
Dowel & positioning hole
C.B.P. 3x10 (6±1Kgfcm)
302
Confidential