Adf Motor Unit - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
2. Remove the screws (x2) that secure the ADF Frame Unit.
3. Release the dowel (x1) of the ADF Base and the dowels
ADF Frame Unit, then remove the ADF Frame Unit from the ADF Base Assy.
ADF Base Assy
C.B.P. 3x8 (6±1kgfcm)
Positioning hole & dowel
Figure 4-144. Removing the ADF Frame Unit (2)
When installing the ADF Frame Unit, align the positioning
holes (x3) of the ADF Frame Unit and ADF Base Assy with the
dowels (x3)
Route the ADF Motor cable, ADF Sensor cable, and the
grounding wire as follows, referring to
1. Route them through the grooves (x3) of the ADF Base Assy.
2. Attach the ADF Cable Cover to the ADF Base Assy.
3. Secure the cables to the ADF Base Assy with acetate tape
(x2).
DISASSEMBLY/ASSEMBLY
(x2) of the
ADF Frame Unit
as shown in Fig. 4-144.
Fig. 4-143.

4.2.7.9 ADF Motor Unit

Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy/ADF Frame Unit
Removal procedure
1. Peel off the acetate tape (x3), and separate the ADF Motor cable, the ADF
Sensor cable and the grounding wire.
2. Release the hooks (x4) of the ADF Cable Cover and open the ADF Cable
Cover, then release the ADF Motor cable, the ADF Sensor cable and the
grounding wire.
Acetate tapes (x2)
Disassembly Procedures
ADF Cable Cover
ADF Sensor cable
ADF Motor cable
Grounding wire
Figure 4-145. Releasing the cables
Revision G
Acetate tape
Hook
175
Confidential