Wireless Lan Board - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

4.2.4.4 Wireless LAN Board

Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/
Upper Housing/Hinge/Rear Right FAX Housing/Right Housing
Removal procedure
1. Remove the screws (x2) that secure the Wireless LAN Board, and remove the
Wireless LAN Board from the hooks (x2) of the Base Frame.
Wireless LAN Board
Figure 4-48. Removing the Wireless LAN Board (1)
DISASSEMBLY/ASSEMBLY
2.
Hook
C.B.P. 3x8 (6±1Kgfcm)
Disassembly Procedures
Disconnect the Wireless LAN cable from the connector and remove the
Wireless LAN Board.
Connector
Wireless LAN cable
Wireless LAN Board
Figure 4-49. Removing the Wireless LAN Board (2)
When installing the Wireless LAN Board, align it with the hooks
(x2) of the Base Frame. (See Fig.
Revision G
4-48.)
131
Confidential