Decoration Plate Left Upper - Epson Artisan 810 Service Manual

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
After installing the Decoration Plate Left Upper, make sure
there is no gap between the Decoration Plate Left Upper and
Left Housing.
Insert the ribs (x3) of the Upper Housing to the inside of the
Housing L/R when installing the Upper Housing. (See
Tighten the screws in the order shown in
When installing the Front Harness Cover, insert the ribs (x2) of
the Front Harness Cover to the Upper Housing, and secure
them with the hook (x1). (See
After removing/replacing the Upper Housing, make the specified
A D J U S T M E N T
R E Q U I R E D
adjustments. (See "9.5 Adjustment"
Artisan 837/730/PX830FWD/PX730WD/TX730WD
Fig. 9-8.)
Fig. 9-8.
Fig. 9-7.)
(p.321).)
Disassembly/assembly

9.4.2.3 Decoration Plate Left Upper

This section describes the disassembly/reassembly procedures of the
C H E C K
Decoration Plate Left Upper for Artisan 837/PX830FWD.
P O I N T
The disassembly/reassembly procedures for Artisan 730/PX730WD/
TX730WD differ from those for Artisan 837/PX830FWD, therefore,
see "9.4.2.16 Decoration Plate Left Upper/Decoration Plate Left
Upper Sub" (p.308) for the procedures.
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Decoration Plate Left Upper Sub/Paper Guide Top Assy/
Upper Housing
Removal procedure
1. Remove the screw (x1) that secures the Decoration Plate Left Upper.
2. Release the hook of the Upper Housing and remove the Decoration Plate Left
Upper from the Upper Housing.
Left Hook
Decoration Plate Left Upper
Figure 9-12. Removing the Decoration Plate Left Upper
Revision G
Upper Housing
Dowel & positioning hole
C.B.P. 3x10 (6±1Kgfcm)
Confidential
296