Epson Artisan 837 Start Here
C11cb20201 all-in-one printer
Hide thumbs
Also See for Artisan 837:
- User manual (368 pages) ,
- Quick manual (44 pages) ,
- Specifications (2 pages)
Advertisement
Artisan
837
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials from the printer, including
from inside the paper cassette.
1
R aise the scanner unit and remove the transportation
lock. Store the transportation lock as shown.
2
Lower the scanner unit.
2
Turn on and adjust
1
C onnect the power cord
to the back of the printer
and to an electrical
outlet.
C
aution: Do not connect
to your computer yet.
*412184200*
*412184200*
French control panel stickers
(included for Canada only)
2
On button, then adjust the control panel
P ress the
3
Select settings
1
Select your language and country.
T ouch the screen to select the desired option. Press
or
to see more countries.
2
S elect the current Daylight Saving Time setting (Winter
or Summer).
3
Select the date format.
4
Use the numeric keypad to set the date, then press OK.
5
Select the time format (12h or 24h).
6
Use the numeric keypad to set the time.
7
Press OK when done.
Note: You can change the date and time settings using the product's
control panel. For more information, see the online User's Guide.
4
Install ink cartridges
1
L ift up the scanner unit.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
C
aution: Don't remove any other seals or the cartridges may
leak.
.
Advertisement
Related Manuals for Epson Artisan 837
Summary of Contents for Epson Artisan 837
-
Page 1: Install Ink Cartridges
Artisan ® Start Here Read these instructions before using your product. Unpack French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials from the printer, including from inside the paper cassette. R aise the scanner unit and remove the transportation lock. Store the transportation lock as shown. Lower the scanner unit. Turn on and adjust C onnect the power cord to the back of the printer and to an electrical outlet. aution: Do not connect to your computer yet. *412184200* *412184200* On button, then adjust the control panel P ress the Select settings Select your language and country. -
Page 2: Load Paper
I nsert the cartridges in the holder for each color. Press each cartridge down until it clicks. Lower the scanner unit. W ait while the printer is priming, which takes about 7 minutes. N ote: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Replacement cartridges will print more pages. aution: Don’t turn off the printer while it is priming or you’ll waste ink. W hen you see this menu on your product’s LCD screen, do not make a selection yet. Continue with the instructions in the following sections to load paper in your product and install software. Load paper The paper cassette has 2 trays. The main tray is for letter- size, A4, legal-size, or 8 10-inch paper. The photo tray is for 4 6- or 5 7-inch photo paper. For instructions on loading legal-size paper, see the online User’s Guide. O pen the front cover (if it’s not open already). P ull out the paper cassette at the bottom of the printer. Then slide back the photo tray and lift it up. S queeze the edge guides and slide them out. Then insert paper with the glossy or printable side facedown. S lide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides. -
Page 3: Install Software
Connect the fax line To fax, connect a phone cord to a telephone wall jack and to the LINE port on the back of your product. To connect a telephone or answering machine, use the EXT. port on your product. See the Quick Guide for more details. Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t be able to fax. Contact your DSL provider for the necessary filter. Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see “Epson technical support”). Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning this software installation. M ake sure the printer is NOT CONNECTED to your computer. Windows : If you see a Found New ® Hardware screen, click Cancel and disconnect the USB cable. You can’t install your software that way. Insert the product CD. W indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Mac OS X: Double-click the ® C lick Install (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. W hen you see the Select Your Connection screen, check the “Connection options” section on this sheet for more... -
Page 4: Epson Connect
Any questions? Quick Guide Basic steps for copying, printing, faxing, and scanning. On-screen help with your software Select or when you’re using your software. Help User’s Guide Click the icon on your desktop (or in the Applications/Epson Software/Guide folder on Mac OS X) to access the online User’s Guide, software downloads, Epson Supplies Central and more (requires an Internet connection). If you don’t have a User’s Guide icon, you can install it from the CD or go to the Epson website, as described below. Epson technical support Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. To speak with a support specialist, call: U.S.: (562) 276-4382, 6 to 8 , Pacific Time, Monday through Friday, and 7 to 4 , Saturday. Canada: (905) 709-3839, 6 to 8 through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.